Connecting The Studiolive Cs18Ai With A Computer Running Studio One - PRESONUS StudioLive CS18AI Visual Quickstart Manual

Connecting the StudioLive CS18AI with a computer running Studio One

3.3
Your CS18AI can be used to control the transport, markers, automation, and mix of your
Studio One DAW software.
NOTE: If you do not use an AVB compatible switch and computer you will only have
control between the CS18AI and Studio One. You will NOT have audio between the
CS18AI and Studio One since the audio transport requires an AVB network.
1. Connect your CS18AI directly to your computer or to a switch on the same network as your computer
NOTE: You can connect your computer to the network with either a wired Ethernet connection or wirelessly.
AVB Switch
4. On the CS18AI press the UCNET button in the Master Control section to open the network
connection view touch screen.
5. On the UCNET screen you'll see a drop down list for connected mixers and software.
6. Touch the software drop down and then touch Studio One
or Capture instance on the list to select it.
7. You are now connected with Capture or Studio One for control from your CS18AI controller.
8. If you're connected with Studio One you can switch between controlling the mix on the RM mixer
and the mix in Studio One by pressing the DAW button.
AVB Switch
StudioLive CS18AI Visual Quick Start Guide
9