Tools, Supplies, And Required Equipment - Traxxas Nitro 4-Tec 3.3 48077 Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your Nitro 4-Tec comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer,
to operate and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
Turnbuckle
wrenches
1.5mm "L" wrench 2.0mm "T" wrench
NiMH 7.2V
battery charger*
REQUIRED TOOLS AND EQUIPMENT
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
Traxxas Top Fuel
™
8 AA alkaline batteries
see page 18
U-joint Antenna nut
wrench
wrench
Foam air filter oil and
2.5mm "T" wrench
extra oiled air filter element
NiMH 7.2V
battery pack*
(sold separately)
After-run oil to protect
the engine from corrosion
*Battery and charger style are subject to change and may vary from images.
Glow plug
4-way wrench
wrench
Extra
Fuel dispensing bottle
glow plug
Small flat-blade screwdriver
for tuning (1/8 inch blade)
For more information on radio
system batteries, see Use the
Right Batteries on page 10.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
NITRO 4-TEC 3.3 • 5