Coolant Level; Brake Fluid Level; Changing The Coolant; Power Steering Fluid Level - CITROEN DS5 Owner's Handbook Manual

Brake fluid level

The brake fluid level should be close
to the "MAX" mark. If it is not, check
the brake pad wear.
Changing the fl uid
Refer to the servicing booklet for details of the
interval for this operation.
Fluid specifi cation
The brake fluid must conform to the
manufacturer's recommendations and meet the
DOT4 standard.

Power steering fluid level

The power steering fluid level should
be close to the "MAX" mark. With
the engine cold, unscrew the cap to
check the level.

Coolant level

The coolant level should be close
to the "MAX" mark but should never
exceed it.
When the engine is warm, the temperature of
the coolant is regulated by the fan. This can
operate with the ignition off.
For vehicles fitted with a particle emissions
filter, the cooling fan may continue to
run after stopping the vehicle, even if the
engine is cold.
In addition, as the cooling system is
pressurised, wait at least one hour after
switching off the engine before carrying
out any work.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the
pressure to drop. When the pressure
has dropped, remove the cap and top
up the level.

Changing the coolant

The coolant does not have to be changed.
Fluid specifi cation
The coolant must conform to the
manufacturer's recommendations.