Height Adjustment - CITROEN DS5 Owner's Handbook Manual

Activation / Deactivation
With the engine running, press button 1.
The activated/deactivated status when the
engine was switched off is retained when
the engine is switched on again.
The strip retracts automatically 3 seconds after
switching off the engine except in STOP mode
of Stop & Start.

Height adjustment

With the engine running, adjust the display
to the required height using button 2:
- towards the rear to move the display up,
- towards the front to move the display
down.
Brightness adjustment
With the engine running, adjust the
brightness of the information using
button 3:
- towards the rear to increase the
brightness,
- towards the front to decrease the
brightness.
We recommend that adjustments are
only made using these buttons when
the vehicle is stationary.
When stationary or while driving, no
objects should be placed around the
transparent strip (or on its cover) to
avoid blocking the strip output and
preventing its correct operation.
In certain extreme weather conditions
(rain and/or snow, bright sunshine, ...)
the head-up display may not be legible
or may suffer temporary interference.
Some sunglasses may hamper reading
of the information.
To clean the transparent strip, use a
clean, soft cloth (such as a spectacles
cloth or microfibre cloth). Do not use
a dry or abrasive cloth or detergent or
solvent products as these could scratch
the strip or damage the anti-reflection
coating.
127
Driving