Chapter 5 Additional Information; How To Change The Usb 3.0 Io Interface Board To Usb/1394 Io Interface Board - i-Stor iS05AAUW8 User Manual

Chapter 5
5.1 How to Change the USB 3.0 IO Interface Board to USB/1394
IO Interface Board
NOTE: Prepare the USB/1394 IO Kit. Disconnect the host, power off
the RAID subsystem, and remove the USB 3.0 cable from the USB 3.0
port.
Contents of the USB/1394 IO Kit:
Additional Information
One (1) USB 2.0/IEEE 1394b IO
Interface Board
One (1) USB 2.0 cable
Two (2) IEEE 1394b cables:
9pin to 9pin and 9pin to 6pin
USB 3.0-to-SATA II RAID Subsystem
User's Manual 49