Preparing The Subsystem And Powering On - i-Stor iS05AAUW8 User Manual

USB 3.0-to-SATA II RAID Subsystem

2.3 Preparing the Subsystem and Powering On

Here are the steps to prepare the RAID subsystem for use.
1. Connect the USB 3.0 cable from RAID subsystem to the SATA port on Host/Server.
Insert the key token into the key token port (if your RAID subsystem has Key
Token).
NOTE: The Key Token is optional. The RAID Subsystem can be
purchased with or without Key Token.
2. Connect the power cord to the power input socket. Plug the other end of power
cord to the power source.
3. Turn on the Power On/Off Switch.
22 User's Manual
Key Token