Table of Contents
Advertisement
USB 3.0-to-SATA II RAID Subsystem
7. An information message will be displayed. Click "OK".
8. The RAID is created successfully. The RAID will be available to the Host/Server
immediately and a new disk device will be detected.
NOTE: Any unreleased disk(s) will automatically become hot spare
disk(s). The status of a hot spare disk will be shown as "S0" for first
host spare, "S1" for second hot spare, and so on. Hot spare disk
status can be viewed using RAID and Disk Information.
44
User's Manual
Advertisement
Table of Contents
