Installing The Rubber Feet - i-Stor iS05AAUW8 User Manual

USB 3.0-to-SATA II RAID Subsystem

2.1.1 Installing the Rubber Feet

Four (4) rubber feet can be attached to the base of the unit to provide stable stand. The
following are the steps in installing the rubber feet:
1. Prepare the four (4) rubber feet.
2. Remove the rubber feet by pulling it outward.
3. Attach the rubber feet on the base of the unit. The rubber feet can also be pasted on
the unit anywhere the user prefers, but must be evenly spaced so that the unit will
stand firm and stable.
20 User's Manual