Table of Contents
Advertisement
: A minimum of 100mm above the fireplace must be non-combustible material (eg
fibre cement sheeting).
Framing and Finishing
Warning: Check appliance to make sure it is levelled and properly positioned.
The appliance should only be mounted on the following surfaces:
• A flat combustible (burnable) surface.
• A raised wooden platform.
• A concrete block or other solid object placed beneath each of the four corners of the
appliance.
To mount the appliance:
1. Choose unit location.
2. Four (4) nailing flanges are supplied with the fireplace (located on the
Figure 2a
fireplace hearth). To level the box and secure it firmly in place, remove
the nailing flanges from the hearth and install at the sides of the
fireplace as shown in Figure 3
Figure 2b
Page 8 of 18
Advertisement
Table of Contents
