Table of Contents
Advertisement
KI-362-SMA-II VARIPOINT™ ADJUSTMENT
INPUT CONNECTIONS
10-24 UNC Screws
All KI products feature a simple
2 pt. barrier strip input.
The KI-362-SMA-II three-way loudspeaker system provides for
pattern adjustment by rotating the position of the high- and mid-
frequency VariPoint module. To accomplish this, first determine
the desired orientation of the Varipoint module. This should be
established before the speaker is suspended. While the speaker is
on its back, remove the eight #10 24-thread screws attaching the
high- and mid-frequency horn module to the front baffle. Rotate
the baffle to the desired position and reattach. Make sure that the
screws are fastened tightly. The module can be adjusted in 45º
increments, to eight possible positions.
DO NOT ATTEMPT THIS OPERATION WHILE THE
SPEAKER IS UPRIGHT!
Advertisement
Table of Contents
