Summary of Contents for Bosch GMF 1400 CE Professional
Page 1
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GMF 1400 CE Professional www.bosch-pt.com 1 609 929 R32 (2008.03) O / 350 UNI de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης ro Instrucţiuni de folosire en Original instructions tr Orijinal işletme talimat originale fr Notice originale pl Instrukcją...
Page 2
GMF 1400 CE Professional 1 609 929 R32 | (6.3.08) Bosch Power Tools...
Page 3
GMF 1400 CE Professional 1 609 929 R32 | (6.3.08) Bosch Power Tools...
Page 4
GMF 1400 CE Professional 1 609 929 R32 | (6.3.08) Bosch Power Tools...
Keep your hair, clothing Damaged or entangled cords increase the and gloves away from moving parts. risk of electric shock. Loose clothes, jewellery or long hair can be caught in moving parts. Bosch Power Tools 1 609 929 R32 | (6.3.08)
Use of the power tool for operations different from those intended could result in a hazardous situation. 1 609 929 R32 | (6.3.08) Bosch Power Tools...
21 Release lever for plunge base the graphics page for the machine and leave it 22 Seat for parallel guide rods open. 23 Chip shield (non-plunge base) 24 Scale for depth-of-cut adjustment (non-plunge base) Bosch Power Tools 1 609 929 R32 | (6.3.08)
It may be used for a preliminary assessment of exposure. The declared vibration emission level repre- 22.11.2007, Robert Bosch GmbH, Power Tools Division sents the main applications of the tool. However D-70745 Leinfelden-Echterdingen if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ.
Original router bits from the extensive Bosch ac- – Use dust extraction whenever possible. cessories program are available at your special- – Provide for good ventilation of the work- ist shop.
Router bit di- Thumb- (accessory). ameter (mm) wheel 4 The machine can be plugged directly into the re- ceptacle of a Bosch all-purpose vacuum cleaner Hardwood (Beech) 4 – 10 5 – 6 12 – 20 3 – 4 with remote starting control. The vacuum clean- er starts automatically when the machine is 22 –...
– Push the depth stop 7 downward until it rests on the step buffer 13. Set the slide with the index mark 8 to the “0” position on the scale for the depth-of-cut adjustment 6. 1 609 929 R32 | (6.3.08) Bosch Power Tools...
(flattened side) of the multifunction router the router (down-cutting), the machine can alongside the auxiliary guide. break loose, eliminating control by the user. Bosch Power Tools 1 609 929 R32 | (6.3.08)
Page 18
Coarsely adjust the required radius by moving Select a router bit with a diameter smaller the router compass and tighten the wing bolts than the interior diameter of the guide 45 and 46. bushing. 1 609 929 R32 | (6.3.08) Bosch Power Tools...
– When using the plunge base 2: Push the re- should be carried out by an after-sales service lease lever for the plunge base 21 downward centre for Bosch power tools. and slowly lower the multifunction router un- In all correspondence and spare parts order, til the set depth-of-cut is reached.
Page 20
34 | English WARNING! Important instructions for con- Australia, New Zealand and Pacific Islands necting a new 3-pin plug to the 2-wire cable. Robert Bosch Australia Pty. Ltd. The wires in the cable are coloured according to Power Tools the following code:...