Display - Pioneer VSX-430-K Operating Instructions Manual

1
1

Display

14 15
20 21 22
14
PHASE
Lights when the Phase Control is switched on
15
AUTO
Lights when the Auto Surround feature is switched on
(page 25).
16
Tuner indicators
RDS – Lights when an RDS broadcast is received
(page 24). (For Europe)
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode (page 22).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
17
Speaker indicators
Shows if the speaker system is on or not
SPA means the speakers are switched on.
SP means the speakers are switched off.
18
Sleep timer indicator
Lights when the receiver is in sleep mode
19
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
20
Character display
Displays various system information.
16 17 18 16 19
23 24 24 25
21
DTS indicators
(page 26).
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing
22
Dolby Digital indicators
D – Lights when a Dolby Digital encoded signal is
detected.
D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
HD – Lights when a source with Dolby TrueHD encoded
audio signals is detected.
PLII – Lights to indicate
(page 6). Listening in surround sound on page 25
23
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround on page 26
more on this).
(page 8).
24
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
25
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (page
(page 25).
Pro Logic II decoding (see
for more on this).
for
7
Controls and displays
26).
4
6
33