Table of Contents
Advertisement
2
2
Connecting your component with no HDMI
terminal
This diagram shows connections of a TV and DVD player (or
other playback component) with no HDMI terminal to the
receiver.
Important
•
When the receiver and TV are connected by composite
cable, the OSD function allowing display of the receiver's
settings, operations, etc., on the TV's screen cannot be
used. In this case, watch the receiver's front panel display
while performing the various operations and making
settings.
Note
•
In order to listen to the audio from the TV that is connected
to this receiver using a analog audio cables, set-up for
analog audio input is required (see
The Input Assign menu
on page
31).
•
You can only connect one component to the optical input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable,
first, switch to the DVD (DVD player) or SAT/CBL (set-top
box), then press
SIGNAL SEL
to choose the audio signal
O1 (OPTICAL1) (see
Selecting the audio input signal on
page
18.
•
You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the DVD (DVD player) or SAT/CBL (set-top box),
then press
SIGNAL SEL
to choose the audio signal C1
Selecting the audio input signal on
(COAXIAL1) (see
page
18.
DVD player
VIDEO OUT
Select one
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
OSD cannot be output.
15
Set-top box
VIDEO OUT
Select one
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
VIDEO IN
TV
Connecting your equipment
This connection is
required in order
to listen to the
sound of the TV
over the receiver.
R
L
OPTICAL
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
Select one
4
6
33
Hide quick links:
Advertisement
Table of Contents
