Multiple Handsets; Registering Handsets - Gigaset C620 User Manual

Multiple handsets

Registering handsets

You can register up to six handsets to your base. You must initiate handset registration on the
handset and on the base station. Both must be carried out within 60 secs.
¤
On the base station: hold (min. 3 secs) the Registration/paging key (C620
¤
On the handset C620 (for other handsets see "Notes"):
- If the handset is not already registered to a base station: Press the display key Register.
Ï
- If the handset is already registered to a base station:
v ¤ ¤
OK
¤
If the handset is already registered to four bases: q Select a base.
The connection to the base is established, this may take some time.
¤
Enter the system PIN if required (factory setting: 0000).
Successful registration is shown on the display.
Notes
u
If six handsets are already registered to the base (all internal numbers assigned), replace
the handset with the internal number 6 with the new one. If this is not possible, because
a conversation is being held for example, the message No available internal number is
given. In this case, de-register another handset that is no longer required and repeat the
registration procedure.
u
For other Gigaset handsets and handsets for other devices with GAP functionality, start
the registration of the handset according to the respective user guide.
da en fi no sv
¤ q Registration ¤ ¤
OK Register Handset
¤
OK
Multiple handsets
¢
page 2).
¤
OK
¤
OK
35