Table of Contents
Advertisement
Functional Overview
The diagram shown on the following page represents the basic controls and
features of the Ultrasonic Distance Meter.
1.
Ultrasonic Sensor Aperture
2.
Laser Pointer
3.
Front Measurement Position
4.
LCD Display
5.
Fm/Bm - This button changes the measurement start point from the
front of the unit to the base of the unit.
6.
Ft/M - This button changes the measurement units between Metric
(Meters) and Imperial (Feet).
7.
READ - This button is used to take a measurement and enable the
LCD Display Backlight.
8.
VOLUME - This button is used to enter the Volume Measurement
Mode.
9.
AREA - This button is used to enter the Area Measurement Mode.
10. +/= - This button is used to sum length measurements
11. ESC CLEAR - This button is used to return to the Length Measure-
ment Mode or delete measurement data stored in memory.
12. RECALL - This button is used to recall stored measurement data.
13. STORE - This button is used to store the current measurement data.
14. POWER - This button is used to turn the unit ON and OFF.
15. Base Measurement Position
16. Belt Clip
17. Battery Cover
XProTec Ultrasonic Distance Meter - Operation Manual
5
Advertisement
Table of Contents
