Table of Contents
Advertisement
Sum of Lengths
Perform the following steps to sum individual length measurements;
1.
You can add measurements by pressing the +/= Button to enter the
Sum Measurement Mode.
2.
Press the READ Button to take a measurement. Press the READ
Button again and the Sum will be shown on the LCD Display.
3.
The Sum Measurement Mode can only measure length values. The
maximum sum measurement is 100 Feet in Imperial Units and 100
Meters in Metric Units.
4.
To return to the Length Measurement screen at any time, press the
ESC CLEAR Button.
Storing & Deleting Measurement Data
The unit includes five (5) memory locations for storing measurement data
including: length, area, volume, and sum.
After a measurement has been taken, press the STORE Button to enter it in
the next empty memory location.
The data stored in these memory locations will be saved until you press the
ESC CLEAR Button or when you replace the battery.
Measurement data can be stored in the unit's memory until all of the
memory locations have been filled. Once all of the memory locations are
full, you will not be able to store any more measurement data until you
delete the measurement data in memory as follows. Press and hold the
ESC CLEAR Button for more than three (3) seconds to delete all of the
measurements stored in memory.
XProTec Ultrasonic Distance Meter - Operation Manual
12
Advertisement
Table of Contents
