Table of Contents
Advertisement
Recalling Measurement Data
To recall stored measurement data, press the RECALL Button.
Measurement data that is stored in memory will be displayed as follows:
•
Length Measurement - Length
•
Area Measurement - Length, Width and Area
•
Volume Measurement - Length, Width, Height, and Volume.
•
Sum Measurement - Total Length.
Battery Maintenance
When the battery power is not sufficient to operate the unit, the LCD
Display will show the Low Battery Icon and replacement of the battery is
required. To prevent inaccurate measurements, replace the battery as soon
as possible.
To replace the battery, perform the following steps;
1.
Remove one (1) screw from the battery cover.
2.
Remove the battery cover.
3.
Disconnect the battery from the unit and replace it with a standard 9
Volt battery and replace the cover and screw.
XProTec Ultrasonic Distance Meter - Operation Manual
13
Advertisement
Table of Contents
