Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for XFtp XProTec
- Page 1 Ultrasonic Distance Meter Operation Manual...
- Page 3 About XProTec Pro-Installer Tools The XProTec line from XFTP is a comprehensive lineup of professional- grade technical tools. These full-featured, field-proven, and easy-to-use tools meet the highest quality standards in the industry, and feature the dependability you expect for complete installation solutions.
-
Page 4: Table Of Contents
Measuring Area ..................11 Measuring Volume ................... 11 Sum of Lengths ..................12 Storing & Deleting Measurement Data ........... 12 Recalling Measurement Data ..............13 Battery Maintenance ................. 13 Specifications ................... 14 Warranty Information ................16 XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 5: Safety Instructions & Warnings
5 mW (Class llla), DO NOT point the laser directly at the eye or indirectly by using a reflective surface such as a mirror. Do not remove the laser warning label from the unit. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 6: Care & Handling
Recall measurement data stored in memory • Computes areas and volumes • Sum of lengths • Auto shut-off • LCD backlight • Audible tones for button press, measurement errors, and measure- ment confirmation. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 7: Functional Overview
13. STORE - This button is used to store the current measurement data. 14. POWER - This button is used to turn the unit ON and OFF. 15. Base Measurement Position 16. Belt Clip 17. Battery Cover XProTec Ultrasonic Distance Meter - Operation Manual... - Page 8 XProTec Ultrasonic Distance Meter - Operation Manual...
-
Page 9: Measurement Requirements
• For accurate results, choose a target surface that is large, flat and hard. • Place sufficiently sized piece of cardboard in front of targets that are too small. XProTec Ultrasonic Distance Meter - Operation Manual... - Page 10 1.5 meters (4.5 feet). • When the distance is more then 10 meters (30 feet), the width of the area being measured should be greater than 2.5 meters (6.5 feet). XProTec Ultrasonic Distance Meter - Operation Manual...
-
Page 11: Initial Setup
Metric (Meters) or Imperial (Feet) measurements. Measurement Start Point To select the measurement start point press the Fm/Bm Button. You can select between either Front of Meter (Fm) or Base of Meter (Bm). XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 12: Measurement Instructions
Once you release the READ Button, the last measurement taken will be shown on the LCD Display. To clear the displayed measurement at any time, press the ESC CLEAR Button. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 13: Measuring Area
Press the READ Button to measure the 3rd length of the volume. After taking the third length measurement, the volume measurement will be shown on the LCD Display. To return to the Length Measurement screen at any time, press the ESC CLEAR Button. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 14: Sum Of Lengths
Press and hold the ESC CLEAR Button for more than three (3) seconds to delete all of the measurements stored in memory. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 15: Recalling Measurement Data
Remove one (1) screw from the battery cover. Remove the battery cover. Disconnect the battery from the unit and replace it with a standard 9 Volt battery and replace the cover and screw. XProTec Ultrasonic Distance Meter - Operation Manual... -
Page 16: Specifications
LCD Back Light: Active for approximately 7 Seconds Operation Environment: Temperature: 0 ~ 40 °C Humidity: 45 ~ 90 %RH Storage Temperature: -10 ~ 60 °C Dimensions: 20 mm x 85 mm x 70 mm Weight: 192 grams XProTec Ultrasonic Distance Meter - Operation Manual... - Page 17 THIS PAGE LEFT INTENTIONALLY BLANK XProTec Ultrasonic Distance Meter - Operation Manual...
-
Page 18: Warranty Information
(including without limitation, any implied warranties of merchantability of fitness), with respect to the condition of the product or its suitability for any use intended for it by the Buyer or by the purchaser from the Buyer. XProTec Ultrasonic Distance Meter - Operation Manual... - Page 20 9710 Park Davis Drive Indianapolis, IN 46235 (317) 895-3600 www.fieldtechproducts.com P/N 0010290000 Rev. 11/08...