Real-Time Counter Memory - Magnavox MVR430MG Owner's Manual

mvr630mg.QX33 2/11/02

34 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location
that you would like to refer to later. Press the
STOP/p button to stop the tape.
2
Press the STATUS/EXIT button to see the status
display.
STOP
TV STEREO
SLP 1 : 23 : 45
3
While the status display is on the screen, press the
CLEAR button to reset the real-time counter to
zero.
STOP
TV STEREO
SLP 0 : 00 : 00
4
While the real-time counter is on the screen, press
the MEMORY button so that M appears beside the
counter.
STOP
TV STEREO
SLP M 0 : 00 : 00
5
To go to a tape location where the real-time counter
was reset to zero, press the REW(ind)/{ button or
the F.FWD/B button when playback is stopped.
When the tape reaches the point at which the counter was
set to zero, the tape will stop.
Press the PLAY/o button to watch the tape.
12:05 PM Page 34
1:08PM
CH10
MVR630MG only
HIFI
1:08 PM
CH10
MVR630MG only
HIFI
1:08 PM
CH10
MVR630MG only
HIFI
POWER VCR/TV EJECT
5
PLAY
REW
F.FWD
STOP
1
STATUS/EXIT
1 2 3
2 CH
4 5 6
7 8 9
0
SPEED TIME SEARCH STILL/PAUSE
4
REC/OTR MEMORY SLOW
Helpful Hints
• The MEMORY button does not
function if REPEAT PLAY is ON.
Details are on page 33.
• To erase a real-time counter memo-
ry, press the MEMORY button until
the M disappears from the screen.
• You may only set the real-time
counter to zero at one location at a
time. Setting the real-time counter
to zero at a second location will
erase the previous real-time counter
to zero setting.
3