Playing - Magnavox MVR430MG Owner's Manual

mvr630mg.QX33 2/11/02

24 Playing

Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set
to.
2
Insert a tape in the VCR. The POWER, VCR/TV, and
CST. IN lights will appear on the display panel. If the tape's
record tab is missing, playback will start automatically.
3
If playback does not start automatically, press the
PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
12:05 PM Page 24
1
Turn on the TV.
2
Insert a tape in the VCR.
POWER VCR/TV EJECT
3
PLAY
REW
F.FWD
5
STOP 4
STATUS/EXIT
1 2 3
CH
4 5 6
7 8 9
0
SPEED TIME SEARCH STILL/PAUSE
REC/OTR MEMORY SLOW
Helpful Hints
• If the tape you want to play is already
in the VCR, make sure the VCR power
is on and the VCR is in VCR position.
(The VCR/TV light will appear on the
display panel. If it does not, press the
VCR/TV button once.) Press the
PLAY/o button.
• Other playback options and features
are on pages 33-40.
• If REPEAT PLAY is ON, playback will
begin automatically when you insert a
tape, even when the record tab is
intact. Details are on page 33.
• Tape playback will not begin auto-
matically if a timer recording is set
and the VCR power is off. Details
are on page 37.
• If you used the AUDIO and VIDEO
OUT jacks to connect the VCR to the
TV, see page 10. You need to choose
a channel other than 3 or 4 at the TV
to see the VCR image on your TV.
6