Remove Screen Protector; Unpackage The Hood; Install Hood - Heatilator NBV3630I Owner's Manual

L. Remove Screen Protector
• Cut the tape on top of the screen protector. See Figure
14.7.
• Open the screen protector and remove the screen. See
Figure 14.8.
Figure 14.7 Cut Packaging Tape
Figure 14.8 Remove Screen Protector
M. Unpackage the Hood
Remove hood from appliance as shown in Figure 14.9.
Figure 14.9 Removing Hood
32
HOOD
Heatilator • Novus B-Vent Series • 4055-188 • Rev. X • 9/15
N. Install Hood
• Locate the four screws just inside the upper section of
the appliance.
• Slide the hood into position under the screw heads.
• Tighten the four screws. See Figure 14.10.
Figure 14.10 Installing Hood