Saving Sent Data As A File (Internet Fax And File) - Toshiba e-STUDIO5540C Scanning Manual

6 INTERNET FAX
 You can save the sent data as a file.
 P.114 "Saving sent data as a file (Internet fax and file)"
 You can also set advanced functions, such as 2-sided Scan and Priority Reserve.
 P.120 "Setting advanced functions"
 For the models below, press [PREVIEW] in this step and then select the scan function in order to
preview your scans at the end of the operation.
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO2550C Series (only when the hard disk is installed)
- e-STUDIO5055C Series
- e-STUDIO507 Series
- e-STUDIO857 Series
For instructions on how to do so, see the following section:
 P.62 "Previewing Scans"
7
If the screen below appears, place another original on the original glass and press
[SCAN] or the [START] button to continue scanning. If you finish scanning all the
originals, press [JOB FINISH].
 The above screen is not displayed when the original is scanned from the Reversing Automatic
Document Feeder
 To cancel the operation, press [JOB CANCEL].
 To change the selected settings, press [OPTION].
* The Reversing Automatic Document Feeder is optional for e-STUDIO4540C Series, e-STUDIO507 Series, e-STUDIO456
Series, e-STUDIO2550C Series, e-STUDIO5055C Series, e-STUDIO307LP and e-STUDIO306LP.
 Saving sent data as a file (Internet fax and file)
When sending an Internet fax, you can also save the sent data in the equipment's shared folder and/or a
network folder (REMOTE1 or 2).
 To save the data in a network folder, the administrator needs to set the equipment configuration. For
details, refer to the TopAccess Guide.
 Internet Fax and File is not available when the forced encryption setting is enabled. To learn more
about the forced encryption setting, refer to the MFP Management Guide.
 The sent data can be saved as a file in the equipment's shared folder (MFP LOCAL) only when the hard
disk is installed in the equipment.
114 Sending Internet Faxes
*
.