Asus Maximus VIII Hero User Manual page 120

USB Support [Partial Initial]
[Disabled]
[Full Initial]
[Partial Initial]
PS2 Devices Support [Enabled]
Allows you to enable or disable control of the PS2 devices' availability during POST.
Configuration options: [Enabled] [Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
The following items appears only when you set the Boot Logo Display item to [Disabled].
Post Report [5 sec]
This item This item allows you to select a desired waiting time of the POST report from
0 to 10 seconds or until <ESC> is pressed.
The following items appears only when you set the Boot Logo Display item to [Full Screen]
or [Auto].
Post Delay Time [3 sec]
This item This item allows you to select a desired additional POST waiting time to
easily enter the BIOS Setup. You can only execute the POST delay time during normal
boot. The values range from 0 to 10 seconds.
This feature only works when set under normal boot.
Boot up NumLock State [Enabled]
[Enabled]
[Disabled]
3-44
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only USB ports with keyboard and
mouse connections will be detected.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Auto adjustments for Windows requirements.
Maximize the boot logo size.
Hid the logo during POST.
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Chapter 3: BIOS Setup