Real-Time Counter Memory - Magnavox CC13B1MG Owner's Manual

40 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
01:08 PM STOP
CH10
SLP 1 : 23 : 45
3
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
0 : 00 : 00
4
While the counter remains on the screen, press the MEM-
ORY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/SEARCH/s button or
the FF/SEARCH/B button when playback is stopped.
When the tape reaches the point at which the counter
was set to zero, the tape will stop. Press the PLAY/o but-
ton to watch the tape.
2
POWER MENU STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
VOLUME MUTE
REW/SEARCH PLAY/
REC/OTR STOP/
1,5
Helpful Hints
• The real-time counter memory will
not function during Repeat Play
mode or A-B Repeat Play mode.
Details are on pages 37-39.
• You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
lost.
3
CLEAR
4
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
FF/SEARCH
PAUSE/STILL