Shooting Still Images/Movies - Sony Cyber-Shot DSC-RX10M2 Instruction Manual

Shooting still images/movies

Mode dial
: Auto Mode
: Movie
Shooting still images
1
Press the shutter button halfway down to focus.
When the image is in focus, a beep sounds and the z or
lights.
2
Press the shutter button fully down to shoot an image.
Shooting movies
1
Press the MOVIE (Movie) button to start recording.
• Use the W/T (zoom) lever to change the zoom scale.
2
Press the MOVIE button again to stop recording.
Notes
• Do not pull up the flash manually. This may cause a malfunction.
• When using the zoom function while shooting a movie, the sound of the camera
operating will be recorded. Sound from the camera tends to be recorded
particularly when [Zoom Speed] is set to [Fast] and when [Zoom Func. on Ring] is
set to [Quick]. The sound of the MOVIE button operating may also be recorded
when movie recording is finished.
• Continuous movie shooting is possible for a maximum of approximately
29 minutes at one time with the camera's default settings and when the ambient
temperature is approximately 25°C (77°F). When movie recording is finished, you
can restart recording by pressing the MOVIE button again. Recording may stop to
GB
protect the camera depending on the ambient temperature.
20
Shutter button
MOVIE
W/T (zoom)
lever
W: zoom out
T: zoom in
indicator