Service And Maintenance; Temperature Regulation; Thermostats; Temperature Settings - Maytag PerformaHJ6301JRT2 User Manual

Table of Contents

Advertisement

Service and Maintenance
Temperature
Regulation
_WARNING
]
HOTTER WATER CAN SCALD: Water
heaters
are|
LOWERTHERMOSTAT
intended to produce hot water. Water heated to
al
WITHHIGHLIMIT
temperature
which
will
satisfy
clothes
washing,|
dish washing,
and other sanitizing
needs can
scald /
and permanently
injure
you upon
contact.
Some
people are more likely to be permanently
injured by
hot water
than
others.
These include the elderly,
children, the infirm, or physically/mentally
handi-
LOWERTHERMOSTAT
capped. If anyone using hot water in your home fits
WITHOUT HIGHLIMIT
into one of these groups or if there is a local code or
state law requiring a certain temperature water at
the hot water tap, then you must take special pre-
__7-_ "_
cautions. In addition to using the lowest possible
temperature
settingthat
satisfies your hot water
Ol
needs, a means such as a mixing valve, should be
_F
used at the hot water taps used by these people or
_i_";;":,_:°_
at the water heater. Mixing valves are available at
plumbing supply or hardware stores. Follow manu-
tacturers instructions for installation of the valves.
Before changing the factory setting on the thermo-
stat, read the "Temperature
Regulation" section in
LOWER THERMOSTAT ADJUSTABLE
this manual.
BEHIND LOWER ACCESS PANEL
AWARNING
I
Never allow small children to use a hot water tap,
or to draw their own bath water. Never leave a
Temperature Settings
child or handicapped
person unattended
in a bath- I
tub or shower.
I
HOT-Is
a thermostat setting of approximately 120°F,
which w'tUsupply hot water at the most eco-
Thermostats
nomical temperatures.
The thermostat(s) ofthls water heater have been factory set at
A-Is a thermostat setting of approximately 130°E
a position which approximates 120°F (HOT) to reduce the
risk of scald injury.
B-Is a thermostat setting of approximately 140°F.
The upper and/or lower thermostat(s) are factory set at a
C-Is a thermostat setting of approximately 150°E
position which approximates 120°F (HOT) and is adjustable
if a different water temperature is desired. Read all warnings
VERY HOT-Is
a thermostat setting of approximately 160°F.
in this manual and on the water heater before proceeding.
It is recommended that the dial be set lower
whenever possible.
NOTE:
Water temperature range of 120°-140°F recom-
mended by most dishwasher manufacturers.
UPPER THERMOSTAT ADJUSTABLE
BEHIND UPPER ACCESS PANEL
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents