Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
Francotyp Postalia
74 Questor
Powdermill lane
Dartford
Kent
DA1 1EF
To book service calls, please visit our website www.fpmailing.co.uk and
click on the service request link
Please install this unit first
Francotyp Postalia
Ultimail
Quick install guide
FP Ultimail
The franking machine should be installed on a flat surface near to a
power socket and an analogue phone socket.
Leave enough room at the rear of the machine for ventilation.
www.fpmailing.co.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Francotyp-Postalia Ultimail
Summary of Contents for Francotyp-Postalia Ultimail
- Page 1 To book service calls, please visit our website www.fpmailing.co.uk and click on the service request link Quick install guide FP Ultimail The franking machine should be installed on a flat surface near to a power socket and an analogue phone socket.
- Page 2 Ultimail keyboard layout Step Connect to our warranty server Now that the credit has been loaded onto the machine we would like you to take a minute to connect to our warranty server to register the machine. Push the setup Button and then the ‘System information’...
-
Page 3: Troubleshooting
/ boxes, please contact Francotyp – Postalia on: 0870 145 0055 including setting up accounts and using the internal scale (where ordered) Ultimail franking machine 2 x master cards Quick reference guide There is a comprehensive troubleshooting section in the operating manual section 13. -
Page 4: Connecting The Peripherals
Included in the franking machine box is a hand feed unit, if you have not value “0.00” (zero imprint). ordered the FP sealing unit you will need to connect this unit to the Ultimail as well as the catcher tray Type the postage value “0”... -
Page 5: Connecting The Cables
Step Connecting the cables (do not switch on at Step Setting the machine to franking mode this stage) Included in the franking machine box, is a black power lead, you should now locate the power connection in the back of the franking machine and plug into To set the franking machine into franking mode you will need to: the mains socket also ensure that the mains socket is switched ‘ON’... -
Page 6: Switching The Machine On
6 as the machine is already programmed to do this equal to 5 before ending calibration If your telephone system is a direct line out you will need to set the Ultimail to do this, continue to step 5... -
Page 7: Adjust The Ink Cartridges
ADJUST Push the ‘TYPE OF PHONE LINE’ option until ‘MAIN STATION’ appears INK CARTRIDGES. Push the SAVE option The Ultimail will prompt you to position an empty letter. Push the CONTINUE option Feed an empty envelope through the Push the HOME button machine for a test print. -
Page 8: Install The Ink Cartridges
Step Step Connect to our re-crediting centre TELESET Install the ink cartridges First remove the ink cartridges from the box and remove the protective tape Now that the dialling parameters have been configured, you can connect to from the bottom of both cartridges our re-crediting centre TELESET to download credit into the machine 24 hours a day 7 days a week Push the TELESET...
Need help?
Do you have a question about the Ultimail and is the answer not in the manual?
Questions and answers