Advertisement
S For exposed mounting there are four outlet positions and three require cutting.
WARNING
!
To keep water from entering the wired remote controller, use a
trap and putty to seal the wire connectors during wiring
installation. During installation, reserve a certain length of the
connecting wire to make removing the wired remote controller
easier during maintenance.
S Reattach the upper part of the wired controller.
S After adjusting the upper case, buckle the upper case. Avoid clamping the wiring during installation.
Fig. 8 - Outlet
Fig. 9 - Wiring hole
Fig. 10 - trap
6
Advertisement
