Code Erasing Procedure; Registering Your Product - Polk Audio Magnifi One Product Manual

5. Press the "Volume Up" button on your TV's IR remote
control once.
6. LEARN LEDs turn solid; the command has been learned.
Two chimes confirm the command has been learned.
Repeat steps 1-6 to program "Volume Down" ( – ), Source, Mute
and Power buttons.
NOTE: Saving your TV's IR remote commands
After you've programmed all of the commands on your TV's
remote control, hold down the Source button for 3 seconds to
initiate the learn function. This saves all of the commands.
Note: If your sound bar fails to learn certain IR remote codes,
the power LED will blink red three times. Try erasing any
previously programmed codes (see below) and carefully
repeat steps 1-6 above.

Code Erasing Procedure

If you have programmed your sound bar to respond to a remote
control and you no longer want it to do so, erase the codes by
pressing the SOURCE key for about 10 seconds while the unit
is in standby mode. The first LED will flash green and then white.
This sequence will repeat three times, and when it's complete
you'll know that previously learned codes have been successfully
erased.
Note: This procedure removes ALL of your bar's remote control
programming. If you only need to change the programming
for some of the bar buttons, follow the six steps in the
sequence previously described to redo any previous
programming. The sound bar will continue to respond to
its included remote control no matter what.
Need Help? Call Us!
Call Polk Customer Service at 1-800-377-POLK (7655) *Option 1*
Bluetooth Operation
Bluetooth technology makes it easy to access your digital audio
library instantly, from any smart phone or Bluetooth device. Select
Bluetooth as the source by pressing the Bluetooth button on
the face of the MagniFi One or on the remote control. When you
choose Bluetooth as the source, the following sequence occurs
until a connection is completed:
1. Three white LEDs will flash.
2. The speaker attempts to connect to the last connected
Bluetooth device, or
3. The speaker enters "discovery mode" and is available to pair
and/or connect to any Bluetooth device. (After 10 minutes,
the system goes into standby mode.)
1. www.polkaudio.com
4. Regardless of the active source (other than Bluetooth), the
speaker will always be in discovery mode and ready to connect
to any previously paired device while the system is on.
Note: When you pair/select Bluetooth from a Bluetooth device,
the loudspeakers will go to the Bluetooth source even though
another source (USB, AUX) has been previously selected.
Note: The last connected Bluetooth device connects when
Bluetooth source is selected.
Whenever Bluetooth is connected, the three white LEDs will
shine solidly, then dim, and there will be an ascending tone.
The sound bar will disconnect and enter into "discovery mode"
for 10 minutes when any of the following occur:
1. Press and release the BT button.
2. The Bluetooth source device disconnects.
When Bluetooth Is Disconnected:
1. When the speaker disconnects, there will be a
descending tone.
2. When the speaker disconnects, the LED will brighten for
two seconds, remain steady bright for two seconds, then
dim for two seconds, then repeat this sequence.
3. Pressing the source button on the speaker will switch the
source to Aux/Analog source.
4. When the speaker wakes from sleep mode, and it's in
Bluetooth source mode, but the Bluetooth device is
disconnected, the speaker will go into discovery mode.
STOP! Register your new MagniFi One online
now for a chance to win FREE Polk products!
When you register your new product you become a valued
member of the Polk Family. Plus, you'll be entered into our
monthly drawing for a chance to win FREE Polk products.
Register your new product at www.polkaudio.com/registration/

Registering your product...

Creates a permanent record of your purchase, in case you
•
misplace your original receipt.
Enters you in our monthly drawing for a chance to win
•
FREE Polk products.
Enrolls you in Club Polk, giving you access to the fun and
•
informative Polk Website Forums, special discounts in the
Polk Web Store, advance notice of Polk Promos, and
discounts on Authorized Polk parts.
Keeps you up to date with news and announcements
•
about your product.
owner's manual
6