Table of Contents
Advertisement
MagniFi One Sound Bar Rear Panel Connections
2
OPT IN
AUX IN
1. Power Connection: Connect the power cable here.
The sound bar remains in "standby" mode all the time.
Audio Input: USB.
2. Audio Inputs: Optical, Analog/AUX
3. SYNC: The SYNC button ensures that the sound bar
and the wireless subwoofer are communicating.
Connecting the Wireless Subwoofer
The included MagniFi One wireless subwoofer is engineered for
easy set-up. It will automatically receive its wireless signal from the
sound bar. You can place the wireless subwoofer anywhere in your
room (within 30-feet of the sound bar) with access to an AC outlet,
even inside an audio cabinet. Optimal blending is achieved when
the subwoofer is placed at the front of your room, to the left or right
of the sound bar.
To connect the wireless subwoofer to the MagniFi One System,
simply plug the subwoofer into a nearby AC outlet. It will turn ON
automatically.
If the wireless subwoofer stops receiving an audio signal,
follow these instructions to re-establish the connection:
1. Unplug the subwoofer.
2. Press and hold the SYNC button on the back of the
MagniFi One sound bar for three seconds.
3. The LED next to the SYNC button on the bar will begin to blink
green rapidly (3 times/second until paired or timeout), indicating
that the bar and the subwoofer are ready to be connected.
4. Plug the subwoofer back into the AC outlet. It will turn ON
automatically. When the subwoofer LED turns solid green,
the bar and subwoofer are re-connected and you're all set.
1.
www.polkaudio.com
3
SUB SYNC
1
POWER
MagniFi One Wireless Subwoofer Panel
& Status Lights
Subwoofer Connection and Control
1. Power Connection: Plug the subwoofer power cord in here.
This is the only wire you'll need.
Subwoofer Status Light Code:
a. Off: The subwoofer is OFF.
b. Flashing Green: The subwoofer is searching for the bar.
c. Solid Green: The subwoofer is connected with the bar.
d. Solid Red: The subwoofer is not connected with the bar.
e. Flashing Red: The subwoofer is in protection mode.
VoiceAdjust™ Technology
VoiceAdjust Technology is easy to control. Use the VoiceAdjust
control button on the remote, or press the VoiceAdjust button
on the front panel of the sound bar. Increase or decrease the
volume of the dialogue/voice reproduction without affecting the
overall master volume of the material. VoiceAdjust Technology
enhances the details in "low volume" or poorly mixed audio
material to boost dialogue and imaging while allowing for lower
overall master volume level.
owner's manual
1
4
Hide quick links:
Advertisement
Table of Contents
