Demonstration Mode; Switching The System On; Switching The System To Standby Mode; Dim Mode - Magnavox MAS-80 User Manual

Basic Functions

Demonstration mode

The system has a demonstration mode that
shows the various available features.
To activate the demonstration
G In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
G Press and holdÇon the system until
"DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.

Switching the system on

In standby/demonstration mode
G Press STANDBY ON to switch on the last
selected source.
G Press CD 1/2/3, TUNER or
TAPE (TAPE 1/2).
G Press CD OPEN/CLOSE.
➜ The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
G Press and hold Ç on the system.
In any other source mode
G Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
14

Dim mode

You can select the desired brightness for the
display.
G In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF.
➜
is shown, except for DIM OFF mode.
DIM
Brightness
DIM
mode
1
normal
2
half
3
half
OFF
normal
Note:
– In standby mode, press DIM to select half or full
brightness for clock display.

Volume control

Press MASTER VOLUME 3 or 4 (VOL +
or - on the remote control) to increase or
decrease the volume level.
To listen through the headphones
G Connect the headphones plug to
the n socket at the front of the
system.
➜ The speakers will be muted.
To switch off the volume temporarily
G Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
G To restore the volume, press MUTE again or
increase the volume level.
Spectrum
Analyzer
off
on
off
on
8240 009 34231