OPERATING INSTRUCTIONS MAG & Electric Blue Amplifier Heads and Combos...
Page 2
Thank you for purchasing your Ashdown Engineering Amplifier. If you live in the UK, please register your purchase by completing this form and return it to the following address: Ashdown Engineering, The Old Maltings, Hall Road, Heybridge, Maldon, Essex CM9 4NJ, England (Alternatively you can register online at http://www.ashdownmusic.com) If you live outside the UK, the local Ashdown distributor may have included a specific registration form for your country.
BASIC PRECAUTIONS WARNING When using electrical products, basic precautions should be followed, including the following: 1. Read all the instructions before using the product. 2. Do not use this product near water – for example, near a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool.
Front Panel Facilities MAG300 MAG600 Electric Blue MAG300, MAG600 and Electric Blue amplifiers share the same front panel facilities. INPUTS - There are two choices of instrument input, these are marked PASSIVE and ACTIVE. The PASSIVE input is high sensitivity and high impedance to suit PASSIVE bass instruments.
Page 5
EQUALISATION - This consists of BASS, MIDDLE and TREBLE controls with two more rotary controls placed in-between. This can be used in a number of ways: Firstly as a very simple Bass, Middle and Treble tone control section as found on older traditional amplifiers.