Digital Cordless Telephone with
Answering Machine
Models: C1011LX, C1012LX, C1013LX and C1014LX
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery pack (AAA 2.4v 300mAh
Ni-MH rechargeable battery) supplied with your C101xLX.
E
BATTERY LOW WARNING
If
icon flashes on the display and you hear a warning beep every 2 minutes
f
during a call, you will need to recharge the handset before you can resume use.
When charging,
icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery should give up to 10 hours of talk time or up
to 200 hours standby time on a single charge.
1
Note that new batteries do not reach their full capacity until it has been put to normal
use for several days.
To keep your batteries in the best condition, leave the handset off the base for a few
hours at a time.
Running the batteries down at least one time per week will help them last as long as
possible.
The charge capacity of the rechargeable battery will reduce with time as it wears out,
giving the handset less talk / standby time. Eventually it will need to be replaced.
After charging your handset for the first time, subsequent charging time is about 6–8
hours a day. The battery and handset may become warm during charging. This is
normal.
1
All talk and standby times are approximate and depend on features selected and
usage pattern.
Date and time
If you have subscribed to a Caller ID Service and the Auto Clock is set to on, the date
and time will set automatically for all handsets when you receive your first call.
If you do not have a Caller ID service, you can set the date and time manually, see
section “5.3. Date and Time”.
Your C101xLX is now ready for use.
3.5
Intercom
3.5.1
Make an internal call
If more than one handset is registered to the base, internal calls can be made
between two handsets.
icon flashes and the display shows the handset number you
*
are calling.
1.
If only 2 handsets are registered to the base, press
and the other handset
*
rings automatically.
t
d
2.
If more than 2 handsets are registered to the base press
and scroll
to the
handset that is to be called and press
.
3.5.2
Receive an internal call
When you receive an internal call,
icon flashes and the handset number that is calling
t
you is displayed.
1.
Press
to make an internal call.
3.5.3
Transfer a call
You can transfer an external call to another handset registered to the base.
*
During an external call:
1.
If only 2 handsets are registered to the base, press and hold
and the other
*
handset rings automatically.
m
2.
If more than 2 handsets are registered to the base press and hold
and scroll
e
d
to the handset that is to be called and press
.
3.
When the other handset answers, press
to complete the transfer.
NOTE
Your external call resumes automatically after 1 minute if there is no answer.
3.5.4
3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1 external caller.
*
During a call with an external caller:
1.
If only 2 handsets are registered to the base, press and hold
and the other
*
handset rings automatically.
m
2.
If more than 2 handsets are registered to the base press and hold
and scroll
d
to the handset that is to join the call and press
.
m
3.
When the other handset answers, press
to connect all three callers to begin
e
the conference call.
4.
Press
to end the call.