Table of Contents
Advertisement
4 Configuration
SNMP
The SNMP Setting allows you to quickly enable/disable the SNMP function. The default SNMP Setting is
Disabled. Click Enabled and then click Apply to make it effective.
If you want to change the settings, click OK and start a new web browser.
Figure 4.2 – Password in Smart Wizard
Figure 4.3 – SNMP in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from the current connection.
Please enter the correct IP address in the Web
browser again and make sure your PC is in the
same subnet with the switch. See Login Web-
based Management for a detailed description.
1
1
9
9
D-Link Web Smart Switch User Manual
Advertisement
Table of Contents
