Fastening The Safety Belts - Lincoln 2016 MKX Owner's Manual

• Height adjuster at the front outboard
seating positions.
• Safety belt pretensioner at the front
outboard seating positions.
• Belt tension sensor at the front outboard
passenger seating position.
· Safety belt warning light and
chime.
· Crash sensors and monitoring
system with readiness indicator.
The safety belt pretensioners at the front
seating positions are designed to tighten the
safety belts when activated. In frontal and
near-frontal crashes, the safety belt
pretensioners may be activated alone or, if
the crash is of sufficient severity, together
with the front airbags. The pretensioners may
also activate when a side curtain airbag is
deployed.

FASTENING THE SAFETY BELTS

Standard belts shown, inflatable belts
similar
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Safety Belts
The front outboard and rear safety restraints
in the vehicle are combination lap and
shoulder belts.
E142587
1. Insert the belt tongue into the proper
buckle (the buckle closest to the direction
the tongue is coming from) until you hear
a snap and feel it latch. Make sure you
securely fasten the tongue in the buckle.
34
E142588
2. To unfasten, press the release button
and remove the tongue from the buckle.
Using a Sliding Clip
(If Equipped)
E200788