Installation; Mounting; Orientation; Procedure - Iluminarc Colorist Panel 36Qa User Manual

Installation

3. Installation
Make sure to mount
this product away
from any flammable
material as indicated in the
Safety Notes.
Not for permanent
outdoor installation
in locations with
extreme environmental
conditions.
Product aperture
must not hang
between 171° and
189° on the vertical axis in
outdoor environments.
Floor Mounting
6

Mounting

Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Installation
ILUMINARC® recommends following the general guidelines below when mounting the
Colorist™ Panel 36Qa.
· When selecting an installation location, consider ease of access to the product for
operation, programming adjustments and routine maintenance.
· Product aperture must not hang between 171° and 189° on the vertical axis in outdoor
environments.
· Not for permanent outdoor installation in locations with extreme environmental
conditions.
· Make sure the product's mounting location can support its weight. See the
Specifications for the weight requirement(s) of this product.

Procedure

The Colorist™ Panel 36Qa comes with an adjustable floor-mounting bracket that doubles as a
hanging bracket to which you can attach a mounting clamp, using the M12 holes in the bottom.
This bracket also serves as a floor stand or wall-mount support. You must supply your own
clamps and make sure the clamps are capable of supporting the weight of this product. You must
use one mounting point per product. Product aperture must not hang between 171° and 189° on
the vertical axis in outdoor environments.
Mounting Clamp
90°
90°
to
170°
171°
to
189°
Overhead Mounting
Colorist™ Panel 36Qa User Manual Rev. 2
Technical
Safety
Cable
190°
to
255°