Samsung SRS635SCPLS User Manual page 24

Side-by-side refrigerator
Table of Contents

Advertisement

LEVELING THE REFRIGERATOR
AND ADJUSTING HEIGHT AND
GAP OF THE DOORS
How to level the refrigerator
To ensure your refrigerator is stable, install it on
a flat, level surface and level it according to the
instructions in this section.
Failure to level the refrigerator may result
in the refrigerator tipping over and causing
CAUTION
personal injury.
- If the front of the refrigerator is slightly higher
than the rear, the doors can be opened and
closed more easily.
- When you install the refrigerator, make sure the
adjustable legs touch the floor.
The adjustable legs are located just behind the
doors on the bottom front right and left corners
of the refrigerator.
- Do not put the food on only one side when
store the food.
If put it on only one side, it is able to occur the
conduction and injury.
DA68-03281D (EN)-00.indd 24
If the freezer side is lower:
• Insert a flathead screwdriver into the height
leveler located at the bottom back of the freezer
door and turn it in the direction of the arrow
until it is level.
If the refrigerator side is lower:
• Insert a flathead screwdriver into the height
leveler located at the bottom back of the
refrigerator door and turn in the direction of the
arrow until it is level.
• Raise the front of the refrigerator so that
the doors close by themselves.
Adjusting the levelers so that the back
of the refrigerator is much higher than
the front of the refrigerator can make it
difficult to open the doors.
• If the back of the refrigerator is not level,
support the bottom with an appropriately sized
object and secure the object in place using
tape.
Slide the refrigerator into its spot and then
adjust the level.
• When pushing the refrigerator in, be careful not
to damage the floor.
English - 24
15. 1. 19.
5:13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents