Advertisement
AVerVision U10 is a USB powered document camera. It comes with 2 extra USB Hubs wherein you can connect
any external USB device such as keyboard, mouse, USB flash drive and more. A power adaptor is supplied and
can be used in cases where the connected external USB device requires more power.
(1)
(2)
(3)
(4)
Folding and Storing
The gooseneck design allows you to freely bend the arm and store the camera head in the camera holder. Once you have
properly secured the camera head to the camera holder, you may now carry the AVerVision U10 from the built-in holder.
Adjust the camera head gently and DO NOT forcibly twist the camera head back and forth or around. It may break
the camera head off from the gooseneck.
Connecting the AVerVision U10 to a computer
Desktop
U10
Laptop
Parts
(5)
(1) Mic
(2) Camera sensor and LED
(3) Camera/LED/AF buttons
(6)
Camera - capture a still image.
LED - turn the overhead LED light on/off
AF - Automatically Adjust the Focus.
(4) Camera holder
(5) Gooseneck arm
(6) USB ports panel
(7)
(7) Power port panel
(8) Holder
(8)
USB cable
Advertisement
Table of Contents
Related Manuals for AVerVision U10
Summary of Contents for AVerVision U10
- Page 1 The gooseneck design allows you to freely bend the arm and store the camera head in the camera holder. Once you have properly secured the camera head to the camera holder, you may now carry the AVerVision U10 from the built-in holder.
- Page 2 Connect the power adapter to a standard 100V~240V AC power outlet. The power from the computer USB is sufficient enough to power AVerVision U10. However, if your laptop or desktop USB port does not supply as much power as the USB specification says it should, then you may encounter problems and need an external power supply.
Need help?
Do you have a question about the U10 and is the answer not in the manual?
Questions and answers