Dhcp - D-Link DWR-118 User Manual

Section 4 - Configuration
On this page you can configure the Dynamic Host Configuration Protocol (DHCP) settings.
Enable DHCP Check the box to enable the DHCP server on your router.
Server:
DHCP IP Address Enter the range of IPs for the DHCP server to use to assign IP
Range: addresses to devices on your network.
DHCP Lease Enter the lease time for DHCP assignments. The default is 86400.
Time:
Primary DNS IP Enter the IP address of the DHCP server (the default is the router's
Address: IP address).
Secondary DNS Enter the IP address of a secondary DNS server, if applicable.
IP Address:
D-Link DWR-118 User Manual

DHCP

29