4G Lte/3G - D-Link DWR-118 User Manual

Section 4 - Configuration
Dial-Up Profile: If Auto-Detection does not work, then try selecting Manual and
filling out the information (supplied by your LTE/3G ISP).
Select the technology used by your ISP; either WCDMA/HSPA or
3G/4G Network
CDMA2000/EV-DO.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Verify Password: Re-enter the password for verification.
Dialed Number: Enter the number to dial, provided by your ISP.
Select Auto, PAP, or CHAP detection. The default authentication
Authentication:
method is Auto.
APN: Enter the APN, provided by your ISP.
Pin Code: Enter the PIN Code, provided by your ISP.
Select either Auto or Manual.
Reconnect
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you selected Auto above, this
Time:
setting will have no effect).
Primary DNS Enter the primary DNS server provided by your ISP here.
Server:
Secondary DNS Enter the secondary DNS server provided by your ISP here.
Server:
D-Link DWR-118 User Manual

4G LTE/3G

15