Table of Contents
Advertisement
www.massportal.com
3.5.2. Object slicer
1) Slicer – select your preferred 3D object slicer;
2) Slice with [Slic3r] – slice the object(s) with predefined profiles using the slicer of your choice ("Slic3r" by
default). Slicing means converting 3D object to G-Code which is read by the printer;
3) Kill Slicing – stop the slicing process using this button;
4) Configure – opens selected slicer's configuration window.
3.5.2.1. Slic3r slicer
Slic3r is one of the slicer programs which converts a 3D objects in layers and generates G-Code which
contains coordinates and settings for the printer on how to exactly print a 3D object. The quality of the printed
object greatly depends on these settings.
For each Settings type (Print Settings, Filament Settings, Printer Settings) you can create and change as
many profiles as you like and select them in the Slicer tab from main window of Repetier-Host.
Note: You can view description of each function just by hovering cursor over it.
2
1
13
3
4
Created ans saved
profiles
Advertisement
Table of Contents
