Table of Contents
Advertisement
www.massportal.com
NB! Keep your hands and fingers clear from the printing surface before sending script commands or
moving head manually. Make sure that it is unable to move the head accidently when calibrating or
checking status of the printer's inner parts to avoid damage!
3.5.
Repetier-Host usage
3.5.1. Object placement
1) Export – saves the changed object as an STL or OBJ file;
2) Add object – add new 3D objects. You can add one by one or even several at a time;
3) Remove object – remove each selected object or use Delete button on keyboard;
4) Copy object(s) – make several copies of the selected object;
5) Autoposition – positions objects on the surface. Works only when there are more than one object;
6) Center object – center each selected object in the center of the plate;
7) Drop object – automatically position each selected object on the Z axis ground level;
8) Object information – show detailed information about the selected object(s) like volume, dimensions,
etc.;
9) Objects – lists all objects added to the project as filenames. Select individual filename to perform actions
with it;
10) Coordinates – move the object on the printing surface by changing ±X, ±Y and ±Z values;
11) Scale – change the object's size by adjusting the value in the X field. The value 1 sets the object to its
original size;
12) Rotation – rotate each object according to your needs by degrees (0 – 359)
4
3
1
1
1
2
1
9
1
12
5
6
7
1
1
1
10
8
11
1
12
1
Advertisement
Table of Contents
