De Havilland DASH8 100 Series Maintenance Manual page 64

WARNING:
(6) Apply electrical power to aircraft.
(7) Push and hold the PRESS TO TEST push button on the ITT indicator. Check that
the analog pointer aligns with the unlit blue dot at 1050, the digital display shows
1050 and the overtemperature advisory light is "ON."
(8) Release the PRESS TO TEST push button on the ITT indicator. Check that the
analog pointer and digital display shows current engine temperature.
(9) On the overhead console, rotate the ENGINE PANEL lighting selector from OFF to
BRT. Check that the ITT indicator back lighting varies from off to bright.
(10) Do an engine start (refer to Chapter 71−00−00).
(11) Check for correct operation of the ITT indicator.
(12) Shut down the engine (refer to Chapter 71−00−00).
MASTER
EFFECTIVITY:
D
S ERIES 100
AIRCRAFT MAINTENANCE MANUAL
MAKE SURE THAT ALL PERSONS IN THE AREA OF THE
AIRCRAFT ARE TOLD BEFORE THE ELECTRICAL SYSTEM IS
ENERGIZED. IF YOU DO NOT DO THIS, YOU CAN CAUSE
INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
77−20−00
Page 202
Jun 20/2005