De Havilland DASH8 100 Series Maintenance Manual page 107

readings at appropriate indicator for pointer and digital indications are within
tolerances provided in Figure 201.
(8) Connect digital voltmeter at receptacle 9811−J104 pins J and K engine (No. 1) or
pins L and M (engine No. 2) and repeat step (7) to obtain digital readings for
indicator and voltage output to Flight Data Recorder (FDR) within limits of Figure
201.
(9) Open circuit breakers, step (2) (a) or (b) and remove signal generator.
(10) Reinstall electrical connectors 6142−P6 and 9811−P104.
(11) Close circuit breakers opened in step (2).
MASTER
EFFECTIVITY: See Pageblock 61−44−00 page 201
D
S ERIES 100
AIRCRAFT MAINTENANCE MANUAL
61−44−00
Page 203
Jun 20/2005