Magnavox ZV450MWB Owner's Manual page 92

Symptom
"Repairing" appears on the TV screen.
Repairing
In a case you intend to cancel the
D
repairing process.
V
D
Do you want to cancel a repairing process ?
When selecting "Yes", the disc may not be
usable.
Yes
Repairing
Picture noise appears.
V
The casette tape does not play back.
C
Recording does not start after you
R
press [REC I].
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
92 92 EN EN
E9C80UD.indd 92 E9C80UD.indd 92
TROUBLESHOOTING
Remedy
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after "Repairing" disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select "Yes" and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
No
• Head cleaning for VCR may be necessary. Refer to "Auto head cleaning"
(page 5).
• Adjust tracking control for better picture by pressing [CHANNEL
while you are playing back a cassette tape.
• No cassette tape is inserted.
• Make sure the cassette tape has a erase-protection tab when you record
to a cassette tape. If needed, cover the hole with cellophane tape.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
/ ]
2006/12/19 14:03:38 2006/12/19 14:03:38