Audio Language, Stereo Sound Mode - Magnavox MDV 530 VR Owner's Manual

58 Audio Language, Stereo Sound Mode

Audio Language
You can select a language for DVDs during playback if multiple
languages are available.
1
Press DVD to put the DVD/VCR in DVD mode if
necessary. The red DVD light will be on.
2
During DVD playback, press AUDIO repeatedly to
choose one of the available languages. The new audio
will be heard. The display will disappear after about five
seconds.
The Audio display may show if the DVD has Dolby Digital
or multi-channel (5.1 CH) sound or its sampling rate (48 k,
for example). The number of available languages appears
after the " / " at the right of the display ( /3, for example).
1.ENG DolbyD 5.1CH 48k/3
Example: English audio
Stereo Sound Mode
If you connected the DVD/VCR to a Stereo or TV using the
COAXIAL DIGITAL AUDIO OUT jack as described on page
15, you cannot adjust Stereo Sound Mode. Otherwise, adjust
Stereo Sound to determine whether you will hear the left
channel, the right channel, or both channels (stereo) during
Audio CD playback.
1
Press AUDIO during Audio CD playback to
choose STEREO, L-CH, or R-CH.
STEREO
L-CH
R-CH
Both right and left channels
are heard (stereo).
Only the left channel is heard.
Only the right channel is heard.
STANDBY-ON
2
TIMER SET
SETUP AUDIO SUBTITLE ANGLE
REC
REPEAT REPEAT
A-B
C-RESET
SKIP/
CLEAR
CH
TITLE MODE RETURN
1
DISPLAY
DVD VCR
DISC
OK
MENU
STOP
REW FF
PAUSE
1
TIMER SET
SETUP AUDIO SUBTITLE
REC REPEAT
C-RESET
SKIP/
CLEAR
CH
TITLE MODE
DISPLAY
DVD
DISC
MENU
STOP
REW
PAUSE
Helpful Hints
• If a language is not available after
pressing AUDIO several times, the
DVD does not have that language.
• Some DVDs only let you change
the language in the Disc menu.
• Audio languages may be abbrevi-
ated (such as ENG for English).
Or, three dashes (- - -) may
appear instead of an abbreviation.
• You cannot adjust the Stereo
Sound Mode when Virtual
Surround is active. Details are on
page 70.
SKIP/
CH
PLAY
STANDBY-ON
ANGLE
REPEAT
A-B
SKIP/
CH
RETURN
VCR
OK
PLAY
FF