Returning To A Pre-Marked Position - Canon XL2 Instruction Manual

Returning to a Pre-marked Position

If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape
will stop at that point when you rewind/fast forward the tape.
This function is operated with the wireless controller.
1. Press the ZERO SET MEMORY button at the point you wish to return to later.
• "0:00:00 Â" appears.
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, rewind the tape.
• "` RTN" appears.
• The tape stops automatically at "0:00:00".
• The tape counter changes to time code.
The zero set memory may not function correctly when the time code has not been recorded
consecutively.
90
Downloaded From VideoCamera-Manual.com Manuals
REW` button
PLAYe button
ZERO SET MEMORY
button
STOP 3 button