Connecting To The Computer Using A Dv (Ieee1394) Cable - Canon XL2 Instruction Manual

Connecting to a Computer Using a DV
(IEEE1394) Cable
You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture
board. Use the editing software supplied with your computer/capture board to transfer video
recording from tape to computer. Refer to the instruction manual of the software.
A driver is preinstalled on Windows operating systems later than Windows 98 Second Edition and on
Mac operating systems later than Mac OS 9, and will be installed automatically.
Users of Windows XP can also download the DV-PC Recorder from the Canon Homepage to record
video/audio to the computer's hard disk. For details, refer to the
❍ Operation may not work correctly depending on the software and the specifications/settings of
your computer.
❍ If the computer freezes while you have connected the camcorder, disconnect and reconnect the
DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer,
turn camcorder and computer back on and reconnect them.
❍ The XL2 cannot be used with DV Messenger.
Refer also to the instruction manual of the computer.
Downloaded From VideoCamera-Manual.com Manuals
DV-PC Recorder Software leaflet.
IEEE1394 (DV) terminal
Commercially available DV cable
E
6-pin
4-pin
101