Functions; Playback - Magnavox MWD200F Owner's Manual

Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any
other equipments which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
DVD-V DVD-V CD CD CD
1 2
1 2
OPEN/CLOSE
STANDBY–ON
Insert a disc with
label facing up.
3 4
3 4
PLAY
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Press [K K / L L / s s / B B ] to select an item, then
press [ENTER] (or [PLAY B B ]).
Calling Up a Menu Screen during Playback
Hit [MENU] to call up the DVD menu.
•
Hit [TOP MENU] to call up the title menu.
•
Hint
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
DVD-V DVD-V CD CD CD
Hit [STOP C C ]. Resume mes-
sage will appear on the TV
screen.
Hit [PLAY B B ], playback will
resume from the point at which
playback was stopped.
Hint
Hint
• To cancel resume, hit [STOP C C ] one more time during the stop
mode.
• The resume information will be kept even when the power is turned
off.
Paused and Step-by-Step Playback
DVD-V DVD-V CD CD CD
Hit [PAUSE F F ] during playback.
To continue playback, hit [PLAY B].
DVD-V DVD-V
The disc goes forward by one frame each time [PAUSE F F ]
is hit during the pause mode.
To continue playback, hit [PLAY B].
Hint
Hint
• On DVDs, set "STILL MODE" to "FIELD" in the Display menu if pic-
tures in the pause mode are blurred. (Refer to pages 14-15.)

Functions

STANDBY–ON
DISPLAY
1
1
AUDIO
1
SUBTITLE
4
ANGLE
7
STOP
REPEAT CLEAR
A-B
PAUSE
SLOW
3
3
PLAY
REV
4
4
STOP
SETUP TOP MENU
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
2
2
Hint
Hint
OPEN/CLOSE
SEARCH
1
1
MODE
• A "prohibited icon" may appear at the top-
right on the TV screen when the operation
2 3
is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3
5 6
due to specific programs.
8 9
• During the playback of a two-layered disc, pictures may
0 +10
stop for a moment. This happens while the 1st layer is
SKIP
being switched to the 2nd layer. This is not a malfunction.
TIP:
FWD
You can change the on-screen language in
MENU "PLAYER MENU" setting. (Refer to page 14.)
Fast Forward/Reverse Search
DVD-V DVD-V CD CD CD
Press [FWD g g ] or [REV h
ing playback to select the required forward or
reverse speed.
To continue playback, hit [PLAY B].
Hint
Hint
• For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
Slow Forward/Slow Reverse
DVD-V DVD-V
Press [FWD g g ] or [REV h
ing the pause mode to select the required for-
ward or reverse speed.
To continue playback, hit [PLAY B].
Hint
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set "STILL MODE" to "FIELD" in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 14-15.)
Zoom
DVD-V DVD-V
Hit [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2
Press [K K / L L / s s / B B ] to slide the zoomed picture across the
screen.
To exit zoom function, hit [ZOOM] repeatedly to select OFF.
Hint
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE
[REV h h ] repeatedly in the zoom mode.
• It may take several seconds to slide the zoomed picture.
– 9 –
OPEN/CLOSE PLAY STOP STANDBY–ON
A B C
1 3 4 1
1 3 4 1
Lights up when
power is on.
h ] repeatedly dur-
h ] repeatedly dur-
x4
k k ] or
1
E
1
EN