Troubleshooting - Buffalo TeraStation 5000 User Manual

14
Check that the license pack was added to "Installed Licenses".
This completes authentication of an additional license.

Troubleshooting

Issue
Video recording does not start.
Possible Cause
Surveillance Camera setting not
enabled.
A LAN cable between the
TeraStation and network camera
is disconnected, or the power is
turned off.
The video recording policy is not
registered.
The device is not connected to a
network on the same LAN, or the
device is not connected to the LAN
port that was set in Settings.
The disk is full.
The time for the TeraStation and
network camera is not correct.
There are not enough camera
licenses for the network cameras.
162
Possible Solution
Enable surveillance camera in
Settings.
Check that the LAN cables are
inserted correctly.
Register the video recording policy
from Camera Policies.
Connect the device to the network
of the LAN port that was set in
Settings.
Free available space on the disk by
moving or deleting files.
Set the time in Settings.
Purchase and register an additional
license.